|
As seen in National Hardwood magazine vol. 79, number 10 dated November 2005 and at
their web site.
National Hardwood reports on Inovec's new G3 products that bring leading edge software design to optimization.
(PDF reprint also available.)
As seen in Timberline magazine vol. 11, number 8 dated August 2005 and at
their web site.
Altenburg Hardwood Lumber got so much value out of upgrading their carriage to YieldMaster with StereoScan, that
they turned around and bought WaneMaster G3 to optimize their new edger. Each time they did their research and were
confident they were buying the best in its class.
(PDF reprint also available.)
As seen in Timberline magazine vol. 11, number 3 dated March 2005 and at
their web site.
Inovec's LineMaster G3 lineal infeed edger optimizer allowed Hull Forest Products to fit an
optimizer where one previously wouldn't fit. The short-coupled edger was a simple upgrade that
didn't require changes to any other machine centers.
(PDF reprint also available.)
As seen in Timber Processing magazine vol. 29, number 10 dated December 2004 and at
their web site.
Inovec optimizers played a key role in Kendrick Forest Product's five year expansion and modernization
program. Inovec optimizers on their headrig and edger have increased yield 17%.
As seen in Timberline magazine vol. 10, number 8 dated August 2004.
RY Timber's Livingston division is buying a LogMaster with StereoScan TM
and a CantMaster after seeing the great success their sister mill in Townsend has had with Inovec
optimizers.
As seen in Timberline magazine vol. 10, number 6 dated June 2004 and at
their web site.
After a trouble-free installation of a YieldMaster with StereoScan TM
increased their yield, Britt Lumber bought another. They saw their overrun climb even higher.
As seen in Timberline magazine vol. 10, number 3 dated March 2004 and at
their web site.
A new YieldMaster carriage with StereoScan TM increases yield,
speeds production, and makes life easier for the staff.
(PDF reprint also available.)
As seen in Timberline magazine vol. 9, number 8 dated August 2003 and at their web site.
Product value improvements from YieldMaster with StereoScan TM,
WaneMaster, and VisualPoint machine controls are key elements in Kendrick's strategic
plans to carry their mill into the next generation. (See also an article from Dec. 2004.)
As seen in Timberline magazine vol. 9, number 4 dated April 2003 and at their web site.
Tells how YieldMaster with StereoScan TM gave them very
significant increases in production, yield, grade and average board width, as well as reductions in miscuts and down time.
As seen in TimberLine magazine vol. 8, number 3 dated March 2002 and at their web site.
Tells how a mill increased both their profitability and their ability to conserve natural resources by upgrading
to a StereoScan TM scanner and the WaneMaster/CantMaster combination for their
gang/edger.
As seen in TimberLine magazine vol. 7, number 10 dated October 2001 and at their web site.
Tells how Inovec has empowered appearance wood mills with market-leading optimizers for edgers and trimmers, culminating in its recent development of its StereoScanTM scanner for head rigs.
As seen in Timber Processing magazine vol. 26, number 8 dated October 2001 and at their web site.
Tells how Inovec worked cooperatively with Northwest Hardwoods to develop its StereoScanTM scanner, which brings pinpoint accuracy to carriage head rigs.
As seen in TimberLine magazine vol. 7, number 7 dated July 2001 and at their web site.
Tells how Thompson Appalachian Hardwoods gained accuracy and production by installing a StereoScan 3D head rig carriage scanning system.
As seen in Southern Lumberman magazine vol. 261, issue 9 dated September 2000.
Tells how Deer Park Lumber improved yield and efficiency at their Pennsylvania hardwood mill by optimizing their headrig, edger and trimmer with Inovec.
As seen in Timber Processing magazine vol. 25, issue 6 dated July/August 2000.
Tells how Travis Lumber Co.'s prototype ASM curve-sawing system, using Inovec optimization, draws praise for production, yield, and payback.
As seen in TimberLine magazine vol. 5, issue 10 dated October 1999.
Tells how Gilkey Lumber improved production in their hardwood mill by installing Inovec optimizers on their carriage headrig and their edger.
As seen in Forest Products Equipment magazine, issue January 1999.
Tells how Wood Products, Inc. revolutionized their production of Northern Appalachian hardwoods by installing Inovec optimizers on their carriage headrig and their edger.
| 
